Wet Pluggable

Connectors and Cables for Challenging Environments

Available in circular (IL/BH), low profile (LPIL/LPBH), mini-circular (MIL/MBH), mini low profile (LPMIL/LPMBH) and micro mini (MCIL/MCBH) styles. Waterblock available. MCIL/MCBH(WB).
Molded neoprene inline connectors supplied on 24" length of neoprene cable (see specs). Custom lengths and cable types available on request.
Some polyurethane molded inline connectors also available.
Bulkhead connectors available with brass or stainless steel bodies and 12" of #18 AWG type E Teflon inboard leads (micro mini connectors have either #20 AWG (2-4/10-16 contact) or #22 AWG (5-8 contact))
Delrin locking sleeves available for circular, mini circular and micro mini styles. Micro mini style bulkheads have male locking sleeve thread as part of body.
Field installable connectors available for some styles with optional overmold boot.
Up to 750 VDC
Up to 20,000 PSI pressure rating in mated condition (see specs).
Bulkhead connectors open face pressure rated to 5,000 PSI.
Contacts gold plated per MIL-G-45204

Close Guidelines

All mounting surfaces require a 32 finish
Do not over tighten bulkhead connectors when mounting.
Align indexes on connectors and mate with minimum twisting and flexing
Care must be taken not to damage contacts in unmated connectors
Contact surfaces must be dry prior to mating.
Lubricate mating surfaces with 3M Silicone Spray or equivalent. DO NOT GREASE. Connectors must be lubricated on a regular basis.
Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
Avoid contact with solvents.
Grip main body of connector during mating or unmating. Do not pull on the cable to disconnect.
Avoid sharp bends at cable entry to connector.
Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.

2-5
6, 8, 12

7/16"-20
5/8"-18

20,000
20,000

#16 AWG SO (IL-5, IL-12 on #18 AWG SO)

2-5,7,9,12

7/16"-20

10,000

#16 AWG SO (LPIL-5 on #18 AWG SO,
LPIL-12 on #20 AWG)

7,9
12,16,
18

7/16"-20
5/8"-18
5/8"-18

20,000
20,000
10,000

#20 AWG

2-8

7/16"-20

10,000

#20 AWG

2-6, 8
10, 12, 16

7/16"-20
1/2"-20

10,000
10,000

#20 AWG
#20 AWG

2-6, 8

7/16" - 20

10,000

#20 AWG

2 (1 pin / 1 socket)

No Bulkhead

10,000

#20 AWG

Locking sleeves

© 2007 Impulse Enterprise, Inc. 1-800-327-0971 +1-858-565-7050