|
|
|
Wet Pluggable
- Available in circular (IL/BH), low profile (LPIL/LPBH), mini-circular (MIL/MBH), mini low profile (LPMIL/LPMBH) and micro mini (MCIL/MCBH) styles. Waterblock available. MCIL/MCBH(WB).
- Molded neoprene inline connectors supplied on 24" length of neoprene cable (see specs). Custom lengths and cable types available on request.
- Some polyurethane molded inline connectors also available.
- Bulkhead connectors available with brass or stainless steel bodies and 12" of #18 AWG type E Teflon inboard leads (micro mini connectors have either #20 AWG (2-4/10-16 contact) or #22 AWG (5-8 contact))
- Delrin locking sleeves available for circular, mini circular and micro mini styles. Micro mini style bulkheads have male locking sleeve thread as part of body.
- Field installable connectors available for some styles with optional overmold boot.
- Up to 750 VDC
- Up to 20,000 PSI pressure rating in mated condition (see specs).
- Bulkhead connectors open face pressure rated to 5,000 PSI.
- Contacts gold plated per MIL-G-45204
- All mounting surfaces require a 32 finish
- Do not over tighten bulkhead connectors when mounting.
- Align indexes on connectors and mate with minimum twisting and flexing
- Care must be taken not to damage contacts in unmated connectors
- Contact surfaces must be dry prior to mating.
- Lubricate mating surfaces with 3M Silicone Spray or equivalent. DO NOT GREASE. Connectors must be lubricated on a regular basis.
- Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
- Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
- Avoid contact with solvents.
- Grip main body of connector during mating or unmating. Do not pull on the cable to disconnect.
- Avoid sharp bends at cable entry to connector.
- Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.
|
| Connector |
# of Contacts |
Bulkhead Thread |
Mated Pressure Rating |
In-line Cable Type |
|
|
| IL/BH |
2-5
6, 8, 12
|
7/16"-20
5/8"-18
|
20,000
20,000
|
#16 AWG SO (IL-5, IL-12 on #18 AWG SO) |
 |
|
| LPIL/LPBH |
2-5,7,9,12 |
7/16"-20 |
10,000 |
#16 AWG SO (LPIL-5 on #18 AWG SO,
LPIL-12 on #20 AWG)
|
|
|
|
HD/HDBH
|
2,4
|
5/8" -18
|
20,000
|
Contact Factory
|
|
|
| MIL/MBH |
7,9
12,16,
18
|
7/16"-20
5/8"-18
5/8"-18
|
20,000
20,000
10,000
|
#20 AWG |
|
|
| LPMIL/LPMBH |
2-8 |
7/16"-20 |
10,000 |
#20 AWG |
|
|
| MCIL/MCBH |
2-6, 8
10, 12, 16 |
7/16"-20
1/2"-20 |
10,000
10,000 |
#20 AWG
#20 AWG |
|
|
|
MCIL
/MCBH(WB)
|
2-6, 8 |
7/16" - 20 |
10,000 |
#20 AWG |
|
|
| RMH |
2 (1 pin / 1 socket) |
No Bulkhead |
10,000 |
#20 AWG |
|
|
| Locking sleeves |
|
|
|
|
|
Top |
|
|
|
|