Underwater Pluggable

Connectors and Cables for Challenging Environments

Pressure balanced design allows underwater mating and unmating of cable assemblies (power off).
Molded neoprene inline connectors supplied on 24" of #18 AWG SO cable (2 contact on SJO). Series 3 connectors supplied on 24" length of #16 AWG SO cable unless otherwise specified.
Bulkhead connectors have brass or stainless steel threaded body depending on connector type. They are supplied with 12" of #18 AWG type E Teflon or Belden 34918 neoprene inboard leads. Series 3 connectors supplied with #16 AWG inboard leads.
Up to 10,000 PSI pressure rating in mated condition (see specs).
Bulkhead connectors open face pressure rated to 5000 PSI

Close Guidelines

All mounting surfaces require a 32 finish
Lubricate male pins liberally with Dow Corning #111 Valve Lubricant or equivalent and apply a small amount in each female socket. Connectors must be lubricated on a regular basis.
Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
Avoid contact with solvents.
Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.
Grip main body of connector during mating or unmating. Do not pull on the cable to disconnect.
Avoid sharp bends at cable entry to connector.

2

7/16"-20
3/8"-24

300

10,000

4

7/16"-20

300

5,000

4

7/16"-20

300

10,000

IE6/8

6,8

1/2"-20

300

10,000

IEB2

2

No bulkhead

300

10,000

IEB6/8

6,8

No bulkhead

300

20,000

IE31

1

7/16"-20

600

10,000

IE32/33

2,3

7/16"-20

600

10,000

IE34

4

1/2"-20

600

10,000

IEB34

4

No bulkhead

600

20,000

IESQ32-BC

2

7/16"-20

600

5,000

Locking Sleeves

© 2007 Impulse Enterprise, Inc. 1-800-327-0971 +1-858-565-7050