|
|
|
Metal Key Titan® Series
- Wet mateable connectors (except MKS-300)
- 316 stainless steel bodies with metal keys for positive alignment.
- Naval bronze engaging nuts have Acme threads for rugged applications and quick connection.
- Special alloys and finishes are also available. Contact Impulse for further information.
- Bulkhead connectors available as a threaded or flanged version with 48" of #18 AWG type E Teflon inboard leads (MKS-300 / MKS(W)-300/MKS(W)-3L00 have 6" of #24 AWG inboard leads)
- Cable connector plugs and receptacles are overmolded using polyurethane (MKS-300 / MKS(W)-300 also available with a neoprene overmold). Straight or right angled overmolds are available for cable connector plugs.
- Cable connector plugs and receptacles are supplied unterminated unless cable termination is specified at time of order.
- Up to 10,000 PSI pressure rating in mated condition.
- Bulkhead connectors open face pressure rated to 5,000 PSI.
- Contacts gold plated per MIL-G-45204
- All mounting surfaces require a 32 finish
- Do not over tighten bulkhead connectors when mounting.
- Lubricate mating surfaces with 3M Silicone Spray or equivalent. DO NOT GREASE. Connectors must be lubricated on a regular basis.
- For MKS-310, contact surfaces must be dry prior to mating.
- Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
- Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
- Avoid contact with solvents.
- Avoid sharp bends at cable entry to connector.
- Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.
|
|
|
|
|