Impulse Products News Worldwide Inquiry Download Search
Connectors and Cables for Challenging Environments
IE55 Subminiature
  • Available as either standard (IE55-1200) or wet pluggable (IE55(W)-1000) style.
  • Bodies and engaging nut are and 6AL-4V Titanium. Engaging nut is Tiodized.
  • IE55-1200 bulkhead connectors are supplied with 6" of #24 AWG type E Teflon inboard leads. IE55(W)-1000 bulkheads have 6" of #22 AWG inboard leads.
  • IE55-1200 cable connector plugs and receptacles are supplied as standard on 24" of #22 AWG polyurethane jacketed cable. IE55(W)-1000 cable connector plugs and receptacles are supplied as standard on 24" of #20 AWG Belden cable.
  • Cable connector plugs can also be supplied unterminated.
  • Working voltage – 300 VDC.
  • Up to 10,000 PSI pressure rating in mated condition.
  • Bulkhead connectors open face pressure rated to 5,000 PSI.
  • Contacts gold plated per MIL-G-45204
Usage
Specs



  • All mounting surfaces require a 32 finish
  • Do not over tighten bulkhead connectors when mounting.
  • Lubricate mating surfaces with 3M Silicone Spray or equivalent. DO NOT GREASE. Connectors must be lubricated on a regular basis.
  • IE55-1200 contact surfaces must be dry prior to mating.
  • Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
  • Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
  • Avoid contact with solvents.
  • Avoid sharp bends at cable entry to connector.
  • Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.
Connector # of Contacts Bulkhead Thread
PDF Get Acrobat Reader
IE55-1200 4, 6 1/4"-28
IE55(W)-1000 2, 3 1/4"-28 Top

© 2007 Impulse Enterprise, Inc.            1-800-327-0971           +1-858-565-7050