|
|
|
IE55 Subminiature
- Available as either standard (IE55-1200) or wet pluggable (IE55(W)-1000) style.
- Bodies and engaging nut are and 6AL-4V Titanium. Engaging nut is Tiodized.
- IE55-1200 bulkhead connectors are supplied with 6" of #24 AWG type E Teflon inboard leads. IE55(W)-1000 bulkheads have 6" of #22 AWG inboard leads.
- IE55-1200 cable connector plugs and receptacles are supplied as standard on 24" of #22 AWG polyurethane jacketed cable. IE55(W)-1000 cable connector plugs and receptacles are supplied as standard on 24" of #20 AWG Belden cable.
- Cable connector plugs can also be supplied unterminated.
- Working voltage – 300 VDC.
- Up to 10,000 PSI pressure rating in mated condition.
- Bulkhead connectors open face pressure rated to 5,000 PSI.
- Contacts gold plated per MIL-G-45204
- All mounting surfaces require a 32 finish
- Do not over tighten bulkhead connectors when mounting.
- Lubricate mating surfaces with 3M Silicone Spray or equivalent. DO NOT GREASE. Connectors must be lubricated on a regular basis.
- IE55-1200 contact surfaces must be dry prior to mating.
- Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
- Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
- Avoid contact with solvents.
- Avoid sharp bends at cable entry to connector.
- Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.
|
| Connector |
# of Contacts |
Bulkhead Thread |
|
|
| IE55-1200 |
4, 6 |
1/4"-28 |
 |
|
| IE55(W)-1000 |
2, 3 |
1/4"-28 |
|
Top |
|
|
|
|