|
|
|
Penetrators
- Allows cable assemblies to penetrate a bulkhead or housing without the use of connectors.
- Available with either a 316 stainless steel or 6061-T6 hard anodized aluminum threaded body.
- Metal body is waterblocked with glass reinforced epoxy insert.
- Molded neoprene assemblies supplied on 24" length of #18 AWG SO cable (9 and 20 contact supplied on 24" length of #20 AWG cable, 26 contact requires custom cable). Custom lengths and cable types available on request. This may require the use of a polyurethane overmold.
- Straight or right-angled overmold available.
- Penetrators are supplied with 12" of #18 AWG type E inboard leads. (9, 20 and 26 contact supplied with #20 AWG)
- Other end of penetrator assembly can be terminated to Impulse connector if required.
- All mounting surfaces require a 32 finish
- Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
- Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
- Avoid contact with solvents.
- Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.
|
| Connector |
Maximum # of Contacts |
|
|
| 3/8"-24 |
4 (3 with aluminum body) |
 |
|
| 1/2"-20 |
9 |
|
| 5/8"-18 (stainless steel only) |
6
|
|
| 3/4"-16 |
8 |
|
| 1"-14 |
26 |
Top |
|
|
|
|