Metal Shell

316 stainless steel bodies with naval bronze engaging nut (MSS-)
Optional material is 6061-T6 hard anodized aluminum (MSA-).
Bulkhead connectors available as a threaded or flanged version.
Both bulkhead and cable connectors use a removable glass reinforced epoxy insert (not available with MSSJ/ MSAJ).
Cable connector plugs and receptacles can be overmolded using neoprene or polyurethane. The conductor insulation and jacket material of specified cable determines overmold material.
Cable connector plugs and receptacles are supplied unterminated unless cable termination is specified at time of order.
Special MSSJ/ MSAJ cable connector plug available for use with oil filled tubes.
Up to 20,000 PSI pressure rating in mated condition. See specs for individual connector ratings.
Bulkhead connectors open face pressure rated to 5,000 PSI.
Contacts gold plated per MIL-G-45204

All mounting surfaces require a 32 finish
Do not over tighten bulkhead connectors when mounting.
Care must be taken not to damage contacts in unmated connectors
Contact surfaces must be dry prior to mating.
Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
Avoid contact with solvents.
Avoid sharp bends at cable entry to connector.
Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.