IE55 / IE55 Metal Shell

Connectors and Cables for Challenging Environments

316 stainless steel bodies and engaging nut.
Bulkhead connectors available as a threaded or flanged version with 48" of #16 AWG type E Teflon inboard leads.
Inverted connectors also available (IE55V).
Cable connector plugs and receptacles are supplied as standard on 24" of #16 AWG SO cable (IE55-1508 is molded on #18 AWG SO cable). Custom lengths and cable types available on request.
Cable connector plugs can also be supplied unterminated.
Working voltage 850 VDC.
Up to 10,000 PSI pressure rating in mated condition.
Bulkhead connectors open face pressure rated to 5,000 PSI.
Contacts gold plated per MIL-G-45204

Close Guidelines

All mounting surfaces require a 32 finish
Do not over tighten bulkhead connectors when mounting.
Lubricate mating surfaces with 3M Silicone Spray or equivalent. DO NOT GREASE. Connectors must be lubricated on a regular basis.
Contact surfaces must be dry prior to mating.
Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
Avoid contact with solvents.
Avoid sharp bends at cable entry to connector.
Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.

IE55-1500

2, 3, 8

5/8"-18

IE55-2000

3, 4, 4HV, 6, 8

3/4"-16

IE55-2400

10, 12

1"-14

IE55-3200

10, 12, 16, 24

1 1/2"-12

IE55V-2000

3, 4, 6, 8

3/4"-16

IE55V-2400

12

1"-14

IE66-3200

4

1 1/2"-12

Top

© 2007 Impulse Enterprise, Inc. 1-800-327-0971 +1-858-565-7050