|
|
|
IE55 / IE55 Metal Shell
- 316 stainless steel bodies and engaging nut.
- Bulkhead connectors available as a threaded or flanged version with 48" of #16 AWG type E Teflon inboard leads.
- Inverted connectors also available (IE55V).
- Cable connector plugs and receptacles are supplied as standard on 24" of #16 AWG SO cable (IE55-1508 is molded on #18 AWG SO cable). Custom lengths and cable types available on request.
- Cable connector plugs can also be supplied unterminated.
- Working voltage 850 VDC.
- Up to 10,000 PSI pressure rating in mated condition.
- Bulkhead connectors open face pressure rated to 5,000 PSI.
- Contacts gold plated per MIL-G-45204
- All mounting surfaces require a 32 finish
- Do not over tighten bulkhead connectors when mounting.
- Lubricate mating surfaces with 3M Silicone Spray or equivalent. DO NOT GREASE. Connectors must be lubricated on a regular basis.
- Contact surfaces must be dry prior to mating.
- Lubricate O-rings with Dow Corning #111 Valve Lubricant or equivalent.
- Keep O-ring grooves clean and avoid cuts and nicks in the O-ring. Replace O-rings when re-mounting connectors.
- Avoid contact with solvents.
- Avoid sharp bends at cable entry to connector.
- Elastomers can be seriously degraded if exposed to direct sunlight or high ozone levels for extended periods of time.
|
| Connector |
# of Contacts |
Bulkhead Thread |
| |
| IE55-1500 |
2, 3, 8 |
5/8"-18 |
 |
|
| IE55-2000 |
3, 4, 4HV, 6, 8 |
3/4"-16 |
|
|
| IE55-2400 |
10, 12
|
1"-14 |
|
|
| IE55-3200 |
10, 12, 16, 24 |
1 1/2"-12 |
|
|
| IE55V-2000 |
3, 4, 6, 8 |
3/4"-16 |
|
|
| IE55V-2400 |
12 |
1"-14 |
|
|
| IE66-3200 |
4 |
1 1/2"-12 |
|
Top |
|
|
|
|