NewsRelease

THOUSAND OAKS, Calif. – December 10, 2007 – Teledyne Technologies Incorporated (NYSE: TDY) announced today that its subsidiary, Teledyne Instruments, Inc., has entered into an agreement to acquire assets of Impulse Enterprise. More (PDF) >

View entire release

Impulse is pleased to announce the addition of two new members to the Titan range of connectors.

The MKS(W)-3L10 is a 10 contact wet mateable connector only slightly larger than the existing MKS-310.

The MKS(W)-400 series falls between the MKS(W)-300 and MKS(W)-500 in size. At the present time it is available as either a 12 or 19 contact wet mateable connector, although further configurations are planned for the future.

Both series use rugged stainless steel bodies and keys for positive alignment. Other materials such as aluminum or titanium are also available upon request.

Bulkhead connectors have a 5,000PSI open face rating and are available as either a threaded or flanged version. For additional security, the bulkheads use a fully waterblocked internal epoxy puck with O-ring seal. The mated pressure rating for both series is 10,000 PSI.

For further information please contact Impulse (impulse@impulse-ent.com) or one of our representatives.

Impulse is pleased to announce the addition of the MHDR series to the highly successful Miniature High Density (MHD) family of connectors.

With a diameter of approximately 2 inches, the MHDR is currently the largest member of the MHD family. It is available with either 19, 55 or 78 contacts, although further configurations are planned for the future.

As with the other MHD series, the standard material for the connector shell is stainless steel with a naval bronze engaging nut. Other materials, such as titanium, are also available upon request.

For further information please contact Impulse (impulse@impulse-ent.com) or one of our representatives.

O-ring installation tools and procedures are now available for all of the Impulse cable connectors which use the dovetail O-ring. This includes the MHD range (G, L, M, O and R) and the MKS-310.

For further information please contact Impulse (impulse@impulse-ent.com) or one of our representatives.

Impulse is pleased to announce the addition of 10,12 and 16 contact connectors to the successful Micro Mini wet pluggable range. Male and female versions of both bulkhead and in-line connectors are available in either neoprene or polyurethane and have a 10,000 PSI mated pressure rating. The bulkhead design is open face pressure rated to 5,000 PSI.

With this addition, the Micro Mini connectors are now available in 9 configurations, with between 2 and 16 contacts. Full details and PDFs for the range can be found in the Products and Download sections of the web-site.

Impulse would like to welcome Laurel Industrial Company as the new representative for our products and services in China. Our goal has always been to provide the highest possible level of worldwide support for our customers, so the wide range of technical expertise and experience present at Laurel will be a valuable addition to our family. We are looking forward to a long and successful relationship between Impulse, Laurel and our customers

Full contact details for Laurel, together with all of our other representatives can be found in the Worldwide section of the web-site.

Following some customer feedback regarding issues with the location of the 5-273 O-ring on the MHDL-CCP, we have performed a series of tests using alternative O-rings from a number of different manufacturers. Based on the results of these tests, all MHDL-CCPs will now be supplied with an R00787-039-70 O-ring.

Visit Impulse and our representatives at the following shows:

WEFTEC 07
San Diego, CA USA
October 15 - 17
www.weftec.com